Close

Products tagged with 'Milling Tools'

View as
Sort by
Display per page

15° Dovetail Cutter, 1" Shank, 2.500" Major Cutting Diameter, .750" Cutting Width, for TDEX-2204_ Inserts, 3 Flutes

15° Indexable DoveDex Cutter 1" Shank, 2-1/2" Cut Dia
€249.17 (EUR)
€211.80 (EUR)

15° Dovetail Cutter, 1/2" Shank, 1" Major Cutting Diameter, .359" Cutting Width, for TDEX-1102_ Inserts, 3 Flutes

15° Indexable DoveDex Cutter 1/2" Shank, 1" Cut Dia
€137.48 (EUR)
€116.86 (EUR)

15° Dovetail Cutter, 3/4" Shank, 1.875" Major Cutting Diameter, .550" Cutting Width, for TDEX-1603_ Inserts, 3 Flutes

15° Indexable DoveDex Cutter 3/4" Shank, 1-7/8" Cut Dia
€178.30 (EUR)
€151.55 (EUR)

15° Dovetail Cutter, 3/8" Shank, 1/2" Major Cutting Diameter, .359" Cutting Width, for TDEX-1102_ Inserts, One Flute

15° Indexable DoveDex Cutter 3/8" Shank, 1/2" Cut Dia
€79.47 (EUR)
€67.56 (EUR)

15° Indexable End Mill, 1" Shank, 1.50" Cutting Diameter, for APKT-1604 inserts, 3 Flutes

15° Indexable Pos End Mill 1" Shank, 1-1/2" Cut Dia
€170.47 (EUR)
€144.91 (EUR)

15° Indexable End Mill, R8 Shank, 2.00" Cutting Diameter, for APKT-1604 inserts, 4 Flutes

15° Indexable Pos End Mill R8 Shank, 2" Cut Dia
€253.96 (EUR)
€215.87 (EUR)

15° Indexable Face Mill, 1" Arbor, 3.00" Cutting Diameter, for APKT-1604 inserts, 6 Flutes

15° Indexable Pos Face Mill 1" Arbor, 3" Cut Dia
€286.48 (EUR)
€243.51 (EUR)

15° Indexable Face Mill, 3/4" Arbor, 2.00" Cutting Diameter, for APKT-1604 inserts, 4 Flutes

15° Indexable Pos Face Mill 3/4" Arbor, 2" Cut Dia
€174.00 (EUR)
€147.90 (EUR)

30° Chamfer Mill, 5/8" Shank, .750" Minor Diameter, 1.600" Major Diameter, for TP_32.5_ Inserts, 2 Flutes

30° Indexable Chamfer Mill 3/4" Shank, 5/8" Cut Dia
€84.95 (EUR)
€72.20 (EUR)

30° Indexable End Mill, 1" Shank, 1.50" Cutting Diameter, for APKT-1604 inserts, 3 Flutes

30° Indexable Pos End Mill 1" Shank, 2-1/2" Cut Dia
€170.47 (EUR)
€144.91 (EUR)

1 2 3 4 5 Next ... Last
Subscribe to newsletters
Email:
Community poll
Have you tried the new Dorian Jet Stream Tooling?